Gutter corner prep - Part 2 ✅💧 Before we touch the snips, we “set” the metal with the hammer so the lip/edge sits flat and the corner can close up tight. Skipping this step usually means tiny gaps… and tiny gaps turn into leaks. Shape first → cut second → tight hand-mitered corner. 🔨✂️🔧 #gutters #handmiteredcorners #gutterguysplus | Gutter Guys Plus
0:27
Gutter corner prep - Part 2 ✅💧 Before we touch the snips, we “set” the metal with the hammer so the lip/edge sits flat and the corner can close up tight. Skipping this step usually means tiny gaps… and tiny gaps turn into leaks. Shape first → cut second → tight hand-mitered corner. 🔨✂️🔧 #gutters #handmiteredcorners #gutterguysplus | Gutter Guys Plus
10.4K views7 months ago
FacebookGutter Guys Plus
Prepping this end so we can attach the next gutter section/corner. This part matters - if the cut isn’t clean and the edge doesn’t sit tight, that joint is way more likely to drip later. Trim it, fit it, fasten it, seal it… then it’s ready for water. 💧🔧 #gutters | Gutter Guys Plus
0:18
Prepping this end so we can attach the next gutter section/corner. This part matters - if the cut isn’t clean and the edge doesn’t sit tight, that joint is way more likely to drip later. Trim it, fit it, fasten it, seal it… then it’s ready for water. 💧🔧 #gutters | Gutter Guys Plus
2.7K views8 months ago
FacebookGutter Guys Plus
We needed to route the downspout through the deck, but the deck boards were nailed down (no screws). Pulling nails would take forever, and it can leave the boards chewed up or looking rough after - not the kind of “fix” we like to leave behind. So we talked it through, chose the cleanest option, and made the adjustment with as little impact to the deck as possible while still getting the drainage where it needs to go. 💧🔧 (And like always: we don’t modify someone’s deck without permission first
0:27
We needed to route the downspout through the deck, but the deck boards were nailed down (no screws). Pulling nails would take forever, and it can leave the boards chewed up or looking rough after - not the kind of “fix” we like to leave behind. So we talked it through, chose the cleanest option, and made the adjustment with as little impact to the deck as possible while still getting the drainage where it needs to go. 💧🔧 (And like always: we don’t modify someone’s deck without permission first
189.5K views8 months ago
FacebookGutter Guys Plus
Hand-mitered corners aren’t just for looks - they’re one of the strongest, cleanest ways to join gutters. When we “hand miter” a corner, we custom-cut the gutter pieces so they fit together tightly, then we seal and fasten the joint to help create a smooth, leak-resistant connection. Why it matters: - Better fit than many pre-made corners - Cleaner water flow around the turn - Fewer weak points = less chance of drips over time Tip: If you notice staining, dripping, or water pooling near a corner
0:21
Hand-mitered corners aren’t just for looks - they’re one of the strongest, cleanest ways to join gutters. When we “hand miter” a corner, we custom-cut the gutter pieces so they fit together tightly, then we seal and fasten the joint to help create a smooth, leak-resistant connection. Why it matters: - Better fit than many pre-made corners - Cleaner water flow around the turn - Fewer weak points = less chance of drips over time Tip: If you notice staining, dripping, or water pooling near a corner
3.1K views9 months ago
FacebookGutter Guys Plus
Installing flashing under the drip edge is one of the best ways to stop water from sneaking behind the gutter. When water runs off the roof, this flashing guides it into the gutter, instead of letting it slip behind and soak the fascia/soffit (which can lead to rot, stains, and peeling paint over time). Signs you might need it: - Water marks behind the gutter - Dripping behind the fascia line - Rotting wood or soft spots near the roof edge It’s a small detail that makes a big difference in keepi
0:37
Installing flashing under the drip edge is one of the best ways to stop water from sneaking behind the gutter. When water runs off the roof, this flashing guides it into the gutter, instead of letting it slip behind and soak the fascia/soffit (which can lead to rot, stains, and peeling paint over time). Signs you might need it: - Water marks behind the gutter - Dripping behind the fascia line - Rotting wood or soft spots near the roof edge It’s a small detail that makes a big difference in keepi
2.1K views9 months ago
FacebookGutter Guys Plus
Gutter Guys clean gutters with gutter guards #adelaide #gutters #maintenance #gutterguys
0:07
Gutter Guys clean gutters with gutter guards #adelaide #gutters #maintenance #gutterguys
822 views7 months ago
YouTubeGutter Guys Adelaide
How Do You Get Rainwater Down 3 Stories? 🤔💧 #seamlessgutters #gutterinstallation #TexasGutterGuys
0:25
How Do You Get Rainwater Down 3 Stories? 🤔💧 #seamlessgutters #gutterinstallation #TexasGutterGuys
30 views2 months ago
YouTubeTexas Gutter Guys
0:20
👋 Hey London Homeowners! Is your siding damaged or outdated? Is it time to consider upgrading it? For a limited time, we're offering an Extended Warranty with your: Gutter, Soffit, Fascia or Siding projects.. PLUS, we're including a 10% discount on all installations! ✅ Licensed & Insured Professionals ✅ 1-Day Installation ✅ Up To 50-Year Warranty ✅ Seamless Gutters ✅ 5'' - 6'' Gutters Available ✅ Premium Siding Products Available ✅ Board/Batten & Lap Siding Available ✅ Satisfaction Guaranteed 2
33.8K views8 months ago
FacebookGutter Guys Plus
0:26
Behind the Scenes at Texas Gutter Guys 😂
671 views1 month ago
YouTubeTexas Gutter Guys
0:37
Gutter Guys Adelaide Cleaning Gutters
1.1K views8 months ago
YouTubeGutter Guys Adelaide
0:18
The Work You Don't See Matters Most | Custom Seamless Gutter Installation in Austin, TX
215 views1 month ago
YouTubeTexas Gutter Guys
1:45
Hotel review in Bradford
553 views3 months ago
YouTubeGutter guys
0:22
Professional Downspout Installation for Seamless Gutters
1.5M viewsFeb 22, 2023
TikTokgutter.guy
0:09
This is one way we cut 45 degree angles on a seamless rain gutter. #gutterinstallation #seamlessgutters #raingutters #fyp #contractorsoftiktok
129.3K viewsApr 20, 2024
TikTokgutter.guy
0:22
Installing a Downspout on a 6” Rain Gutter
273.6K viewsOct 5, 2022
TikTokgutter.guy
1:52
#fyp #abandonedplaces #foryoupagе #foryoupage❤️❤️ #bradford
9.4K views3 months ago
TikToknoelyboy45
0:22
This is one quality way of installing a rain gutter downspout. #gutter...
40.4K viewsFeb 22, 2024
TikTokgutter.guy
0:28
DIY Handmade Splash Guard for Inside Corner Rain Gutters
74.7K viewsFeb 14, 2023
TikTokgutter.guy
0:11
Popping a outlet hole on a seamless rain gutter for downspout installation. #seamlessgutters #raingutters #gutterinstallation #contractorsoftiktok #fyp #onthisday
68.3K viewsAug 31, 2024
TikTokgutter.guy
See more
Static thumbnail place holder